Skip to content
Support

Support

  • Status
  • Log Out
  • Languages
  • Knowledge Base
  • Status
  • Log Out
  • Languages
  • Knowledge Base
    • Home
    • Knowledge Base
    • Knowledge Base
    • Kaizen
    • Charts and Reports
    • List of Charts

    Kaizen

    • Knowledge Base
    • Kaizen
    • Charts and Reports
    • List of Charts

    List of Charts

    Current Charts (13)

    • Summary Tables
    • Custom Charts

    View all 13 articles

    Legacy Charts (49)

    • Column Charts
    • Stacked Column Charts
    • Line Charts
    • Area Charts
    • Pie Charts

    View all 49 articles
    • Vault
      • Vault
      • Create a Calculated Trend Log without receiving an Insight
      • Create Meters from Non-Cumulative Trend Logs
      • Manage Trend Logs
      • Load Controller Database
    • Charts and Reports
      • List of Charts
        • Legacy Charts
          • Column Charts
            • Multipurpose Non-Cumulative Chart
            • Multipurpose Cumulative Chart
            • Non-Cumulative 3-Input (1-Column + 2-Line)
            • Cumulative 5-Input Chart (2-Column + Stacked 3-Column)
            • Cumulative 5-Input (Stacked 3-Input + Stacked 2-Input)
            • Cumulative 5-Input Comparison
            • Cumulative 4-Input Comparison
            • Cumulative 3-Input Chart
            • Cumulative 2-Input Chart
            • Non-Cumulative 1-Input Bar Chart
            • Cumulative 1-Input (2-Bar)
            • Cumulative 3-Input (1-Col. + 1-Baseline-Col. + 1-Target-Col. + Temp-line)
            • Cumulative 3-Input (1-Column + 1-Baseline-Column + Temp-line)
            • Cumulative 1-Input
          • Stacked Column Charts
            • Multipurpose Non-Cumulative Chart
            • Multipurpose Cumulative Chart
            • Cumulative 5-Input (Stacked)
            • Cumulative 4-Input (Stacked)
            • Cumulative 3-Input (Stacked)
            • Cumulative 2-Input (Stacked)
            • Cumulative 5-Input Chart (2-Column + Stacked 3-Column)
            • Cumulative 5-Input (Stacked 3-Input + Stacked 2-Input)
          • Line Charts
            • Multipurpose Non-Cumulative Chart
            • Multipurpose Cumulative Chart
            • Non-Cumulative 12-Input Line Chart
            • Non-Cumulative 11-Input Line Chart
            • Non-Cumulative 10-Input Line Chart
            • Non-Cumulative 9-Input Line Chart
            • Non-Cumulative 8-Input Line Chart
            • Non-Cumulative 7-Input Line Chart
            • Non-Cumulative 6-Input Line Chart
            • Non-Cumulative 5-Input Line Chart
            • Non-Cumulative 4-Input Line Chart
            • Non-Cumulative 3-Input Line Chart
            • Non-Cumulative 4-Input Line Chart
            • Non-Cumulative 3-Input Line Chart
            • Non-Cumulative 3-Input (1-Column + 2-Line)
            • Non-Cumulative 2-Input Line Chart
            • Non-Cumulative 1-Input Line Chart
            • Heating and Cooling Degree Days (deg F)
            • Heating and Cooling Degree Days (deg C)
          • Area Charts
            • Cumulative 3-Input (Accumulating Line Series)
            • Cumulative 5-Input (Accumulating Line Series)
            • Cumulative 4-Input (Accumulating Line Series)
            • Cumulative 2-Input (Accumulating Line Series)
          • Pie Charts
            • Cumulative 2-Input (Pie Chart)
            • Cumulative 3-Input (Pie Chart)
            • Cumulative 4-Input (Pie Chart)
            • Cumulative 5-Input (Pie Chart)
        • Current Charts
          • Summary Tables
            • Building Operator Report - Schedules Changed
            • Building Operator Report - Detailed Insight Report
            • Building Operator Report - Setpoints in Manual
            • KPI Threshold Executive
            • KPI Maintenance
            • Performance KPI Executive
            • Insights Executive
            • Insights Digest
            • Building Operator Report - Equipment In Hand
            • Device Backup Executive
            • Device Backup Exception Digest
          • Custom Charts
            • Temperature Bin Comparison
            • Average 11-Input Comparison
      • Charts
      • Create a Chart
      • Manage Reports
    • CopperConnector
      • Adding new CopperConnector
      • Mapping buildings to CopperConnector
      • CopperConnector Registry
    • Insights
      • Insights
      • Adding Enhanced Prioritization to a Rule Template
      • Advanced Filtering in Insight Management
      • Golden Standard Configuration
      • Configure Infrastructure Insights
      • Copy and Paste Golden Standard Configuration
      • Create Custom Views with Insight Management
      • Export Insight Reports with Insight Management
      • Configure Quick Filters
      • Import Rule Templates from the Building's Insight Page
      • List of Infrastructure Insights
      • Manage Insights
      • Subscribe to Views in Insight Management
      • Tagging Insights
      • How to use the Input Data Block
      • Manage Working Rules
      • Create Working Rules
    • Navigation and Administration
      • Navigation and Administration
      • Advanced Search
      • Create a Building and Map a CopperCube to the Building
      • Manage Permissions
      • Add Admin Users
      • Create a new Kaizen User and set Password
      • Manage Building Settings
      • Move a Building
      • Manage Favorites
      • Status Page for Kaizen Server
    • Release Notes - Kaizen
      • V0
        • Curator Release Notes: V0.3.3
        • Curator Release Notes: V0.5.3 (Beta 1)
        • Curator Release Notes: V0.6.1 (Beta 1)
        • Curator Release Notes: V0.6.2 (Beta 1)
        • Curator Release Notes V0.6.3 (Beta 1)
        • Curator Release Notes: V0.6.4 (Beta 1)
        • Curator Release Notes: V0.7.1
      • V1
        • Kaizen Release Notes: V1.1.2
        • Kaizen Release Note: V1.2.0
        • Kaizen Release Notes: V1.3.0
        • Kaizen Release Notes: V1.3.2
        • Kaizen Release Notes: V1.5.1
        • Kaizen Release Notes: V1.5.2
        • Kaizen Release Notes: V1.5.3
        • Kaizen Release Notes: V1.5.4
        • Kaizen Release Notes: V1.5.5
        • Kaizen Release Notes: V1.5.7
        • Kaizen Release Notes: V1.6.0
        • Kaizen Release Notes: V1.6.1
        • Kaizen Release Notes: V1.6.2
        • Kaizen Release Notes: V1.6.3
        • Kaizen Release Notes: V1.6.4
        • Kaizen Release Notes: V1.6.5
        • Kaizen Release Notes: V1.6.7
        • Kaizen Release Notes: V1.6.8
      • V2
        • Kaizen Release Notes: V2.0.2
        • Kaizen Release Notes: V2.0.3
        • Kaizen Release Notes: V2.0.4
        • Kaizen Release Notes: V2.0.5
        • Kaizen Release Notes: V2.0.6
        • Kaizen Release Notes: V2.0.7
        • Kaizen Release Notes: V2.0.8
        • Kaizen Release Notes: V2.1.0
        • Kaizen Release Notes: V2.1.1
        • Kaizen Release Notes: V2.1.2
        • Kaizen Release Notes: V2.1.3
        • Kaizen Release Notes: V2.1.4
        • Kaizen Release Notes: V2.1.5
        • Kaizen Release Notes: V2.1.7
        • Kaizen Release Notes: V2.1.8
        • Kaizen Release Note: V2.1.9
        • Kaizen Release Note: V2.2.0
        • Kaizen Release Note: V2.2.1
        • Kaizen Release Note: V2.2.2
        • Kaizen Release Note: V2.2.3
        • Kaizen Release Note: V2.2.4
        • Kaizen Release Note: V2.2.5
        • Kaizen Release Note: V2.2.6
        • Kaizen Release Note: V2.2.7
        • Kaizen Release Note: V2.2.8
        • Kaizen Release Note: V2.2.9
        • Kaizen Release Note: V2.2.10
        • Kaizen Release Note: V2.2.11
        • Kaizen Release Note: V2.2.12
        • Kaizen Release Note: V2.3.00
        • Kaizen Release Note: V2.3.01
        • Kaizen Release Note: V2.3.02
        • Kaizen Release Note: V2.3.03
        • Kaizen Release Note: V2.3.04
        • Kaizen Release Note: V2.4.00
        • Kaizen Release Note: V2.4.01
        • Kaizen Release Note: V2.4.02
        • Kaizen Release Note: V2.4.03
        • Kaizen Release Note: V2.4.04
        • Kaizen Release Note: V2.4.05
        • Kaizen Release Note: V2.4.06
        • Kaizen Release Note: V2.4.07
        • Kaizen Release Note: V2.2.9
        • Kaizen Release Note: V2.2.10
        • Kaizen Release Note: V2.2.11
        • Kaizen Release Note: V2.2.12
        • Kaizen Release Note: V2.3.00
        • Kaizen Release Note: V2.3.01
        • Kaizen Release Note: V2.3.03
        • Kaizen Release Note: V2.3.04
        • Kaizen Release Note: V2.4.00
        • Kaizen Release Note: V2.4.01
        • Kaizen Release Note: V2.4.02
        • Kaizen Release Note: V2.4.04
        • Kaizen Release Note: V2.4.05
        • Kaizen Release Note: V2.4.06
        • Kaizen Release Note: V2.4.07
      • V3
        • Kaizen Release Note: V3.0.00
        • Kaizen Release Note: V3.0.01
        • Kaizen Release Note: V3.0.02
        • Kaizen Release Note: V3.0.03
        • Kaizen Release Note: V3.0.04
        • Kaizen Release Note: V3.0.05
        • Kaizen Release Note: V3.0.06
        • Kaizen Release Note: V3.0.07
        • Kaizen Release Note: V3.0.08
        • Kaizen Release Note: V3.0.09
        • Kaizen Release Note: V3.0.10
        • Kaizen Release Note: V3.1.0
        • Kaizen Release Note: V3.1.1
        • Kaizen Release Note: V3.1.2
        • Kaizen Release Note: V3.1.3
        • Kaizen Release Note: V3.1.4
        • Kaizen Release Note: V3.1.5
        • Kaizen Release Note: V3.1.6
        • Kaizen Release Note: V3.1.7
        • Kaizen Release Note: V3.1.8
        • Kaizen Release Note: V3.1.9
        • Kaizen Release Note: V3.1.10
        • Kaizen Release Note: V3.1.11
        • Kaizen Release Note: V3.1.12
        • Kaizen Release Note: V3.1.13
        • Kaizen Release Note: V3.1.14
        • Kaizen Release Note: V3.1.15
        • Kaizen Release Note: V3.2.00
        • Kaizen Release Note: V3.2.1
        • Kaizen Release Note: V3.2.2
        • Kaizen Release Note: V3.2.3
        • Kaizen Release Note: V3.2.4
        • Kaizen Release Note: V3.3.0
        • Kaizen Release Note: V3.3.0
        • Kaizen Release Note: V3.3.3
        • Kaizen Release Note: V3.3.4
        • Kaizen Release Note: V3.3.5
        • Kaizen Release Note: V3.3.6
        • Kaizen Release Note: V3.3.7
        • Kaizen Release Note: V3.3.8
        • Kaizen Release Note: V3.3.9
        • Kaizen Release Notes: V3.3.10
        • Kaizen Release Notes: V3.4.00
        • Kaizen Release Notes: V3.4.01
        • Kaizen Release Notes: V3.4.02
        • Kaizen Release Notes: V3.4.03
        • Kaizen Release Notes: V3.4.05
        • Kaizen Release Notes: V3.4.06
        • Kaizen Release Notes: V3.4.07
        • Kaizen Release Notes: V3.4.08
        • Kaizen Release Notes: V3.4.09
        • Kaizen Release Notes: V3.4.10
        • Kaizen Release Notes: V3.4.11
        • Kaizen Release Notes: V3.4.12
        • Kaizen Release Notes: V3.4.13
        • Kaizen Release Notes: V3.4.14
        • Kaizen Release Notes: V3.4.15
        • Kaizen Release Notes: V3.4.16
        • Kaizen Release Notes: V3.5.01
        • Kaizen Release Notes: V3.5.02
        • Kaizen Release Notes: V3.5.03
        • Kaizen Release Notes: V3.5.04
        • Kaizen Release Notes: V3.6.00
        • Kaizen Release Notes: V3.6.01
        • Kaizen Release Notes: V3.6.2
        • Kaizen Release Notes: V3.6.3
        • Kaizen Release Notes: V3.6.5
        • Kaizen Release Notes: V3.6.6
        • Kaizen Release Notes: V3.6.7
        • Kaizen Release Notes: V3.6.8
        • Kaizen Release Notes: V3.6.9
        • Kaizen Release Notes: V3.7.1
        • Kaizen Release Notes: V3.7.2
        • Kaizen Release Notes: V3.8.1 - Hotfix
        • Kaizen Release Notes: V3.7.9
        • Kaizen Release Notes: V3.7.5
        • Kaizen Release Notes: V3.7.6
        • Kaizen Release Notes: V3.7.7
        • Kaizen Release Notes: V3.7.8
        • Kaizen Release Notes: V3.8.1
        • Kaizen Release Notes: V3.8.2
        • Kaizen Release Notes: V3.8.3
        • Kaizen Release Notes: V3.8.4
        • Kaizen Release Notes: V3.8.5
        • Kaizen Release Note: V3.8.6
    • Settings
      • Settings
      • Add a Sub-Client in Your Client Account
      • Create and Configure Groups
      • Create and Configure Users
      • enteliWEB and Kaizen
      • Create a Building and Map a CopperCube to the Building
      • Manage Building Settings
      • Set Up Your Kaizen Account
    • Systems
      • Systems
      • Configuring Rules Using Systems
      • Import Rule Templates Using Systems
      • System Auto-Discover
      • System Hierarchy
      • System Manual Setup
      • Quick Tag Multiple Systems
    • FDD Portfolio
      • FDD Portfolio
      • Tagging CTLs for the FDD Portfolio
      • Widget Descriptions
    • Rules and Logic
      • List of Rule Templates
        • CopperTree Standard Rules 2021
          • Energy Rules
            • Power Calculations - Cooling Tower Fan
            • Power Calculations - Exhaust Fan
            • Primary air system is heating while discharge air temperature is above setpoint
            • VFD consistently runs at 100% speed
            • Primary air system is cooling while discharge air temperature is below setpoint
            • Power Calculations - Return Fan
            • Power Calculations - Pump
            • Power Calculations – Supply Fan
            • NIST APAR10 - Outdoor and mixed air temp should be nearly the same (Mode 3 - Mech. Cooling w/100% OA)
          • Fault Detection
            • Airflow sensor may be faulty
            • Boiler command and status signals are mismatched
            • Zone Air Temperature sensor may be faulty
            • Health Compliance Package - Zone Temperature is outside the acceptable range
            • Supply air temperature should be greater than mixed air temperature while heating
            • Health Compliance Package - Building Pressure [kPa] Analysis
            • Zone Air Humidity sensor may be faulty
            • Fume hood in Emergency Purge Mode for longer than expected
            • Fume hood airflow is exceeding setpoint
            • Fume hood sash open during unoccupied hours
            • Health Compliance Package - Domestic Hot Water Flow Temperature Outside Range
            • Health Compliance Package - Hot water valve consistently 100% open
            • Health Compliance Package - Zone hot water valve consistently 100% open
            • Health Compliance Package - Chilled water valve consistently 100% open
            • Return air temperature sensor may be faulty
            • Discharge air temperature sensor may be faulty
            • Mixed Air Temperature sensor may be faulty
            • Hot Water Return Temperature sensor may be faulty
            • Chilled Water Return temperature sensor may be faulty
            • Chiller capacity is inadequate
            • Lead-lag pumps are running simultaneously
            • Create a Schedule CTL
            • VAV damper is consistently at 100%
            • Fume hood airflow is not reaching setpoint
            • Chiller is overcooling
            • Cooling tower fan command and status signals are mismatched
            • Zone air carbon dioxide (CO2) sensor may be faulty
            • Zone consistently in occupied mode
            • Cooling is active when zone temperature is below setpoint
            • Enhanced Prioritization - Boiler Cycling Excessively
            • Cooling coil valve may be leaking.
            • Supply air temperature is modulating excessively
            • Heating valve remains open while unit is inactive
            • Outdoor air damper is fully open while cooling, with OAT above threshold
            • Mechanical cooling while outdoor air temperature is in ideal free cooling range
            • Enhanced Prioritization - Primary Air System Runtime Analysis
            • Health Compliance Package - Filter Replacement
            • Health Compliance Package - Outdoor Air Damper is not opening enough
            • Health Compliance Package - Purge Mode not utilized
            • Enhanced Prioritization - Cooling Tower Cycling Excessively
            • Enhanced Prioritization - Unit Heater Cycling Excessively
            • Heating is active when zone temperature is above setpoint
            • Health Compliance Package - Equipment Runtime Monitoring
            • Hot water supply temperature sensor may be faulty
            • Chilled water supply temperature sensor may be faulty
            • Exhaust fan command and status signals are mismatched
            • Pump command and status signals are mismatched
            • Return fan command and status signals are mismatched
            • Supply fan command and status signals are mismatched
            • Chilled command and status signals are mismatched
            • Outdoor air damper is consistently at 100%
            • Return air damper is consistently at 100%
            • Mixed air damper is consistently at 100%
            • Heating and Cooling Simultaneously
            • Enhanced Prioritization - Boiler operating above lockout temperature
            • Enhanced Prioritization - Chiller operating below lockout temperature
            • Enhanced Prioritization - Pump Cycling Excessively
            • Enhanced Prioritization - Return Fan Cycling Excessively
            • Enhanced Prioritization – Supply Fan Cycling Excessively
            • Health Compliance Package - CO2 Concentration Analysis
            • Cooling is insufficient
            • Heating is insufficient
            • Health Compliance Package - Overall Cooling Saturation
            • Health Compliance Package - Overall Heating Saturation
            • Health Compliance Package - Zone air humidity is outside acceptable range
            • Health Compliance Package - Hours of Occupancy
            • Outdoor and mixed air temperature should be similar when OAD is 100% open
            • Supply air temperature should be lower than mixed air temperature while cooling
            • Cooling valve remains open while unit is inactive
          • Integrity KPI
            • VAV supply airflow control requires tuning
            • Delta-T Analysis of Chilled Water System
            • Delta-T Analysis of Hot Water System
            • Hydronic Differential Pressure requires tuning
            • VFD Speed Analysis (Pump)
            • Hot water supply temperature control is poor
            • Condenser water supply temperature control is poor
            • Chilled water supply temperature control is poor
            • Health Compliance Package - Critical Zone Pressure Analysis
            • Hot deck temperature control is poor
            • Supply air pressure control requires tuning
            • VFD Speed Analysis (Exhaust Fan)
            • VFD Speed Analysis (Supply Fan)
            • VFD Speed Analysis (Return Fan)
            • Supply Air Temperature control is poor
            • Mixed air temperature control is poor
            • Cold deck temperature control is poor
        • Legacy Rules
          • 1-Meter Energy approaching Target
          • 1-Meter Energy-Baseline-Target
          • 1-Meter Energy over Target
          • 1-Meter Filter, Aggregation and Conversion (USGal to Litres)
          • 1-Meter Filter, Aggregation, and Conversion (kWh to GJ)
          • 1-Meter Filter and Aggregation
          • 1-Virtual Meter Filter and Aggregation
          • 1-Virtual Meter Filter and Aggregation Hourly
          • 5-Meter Energy-Baseline-Target
          • 5-Meter Filter, Aggregation and Conversion (USGal to Litres)
          • 5-Meter Filter, Aggregation and Conversion (kWh to GJ)
          • 5-Meter Filter and Aggregation
          • Determine if AHU MAT is not following RAT when drawing no outside air (Air Damper Leakage)
          • AHU Mode of Operation (for use with NIST APAR rule set)
          • Calculate electrical energy consumption and demand using VFD speed and motor size (affinity law)
          • Calculate kW/ton and Coefficient of Performance for Water Cooled Chillers (uses deg F temperature TLs)
          • Convert energy savings to reduction in CO2 emissions (electrical)
          • Convert Samples to Accumulating Meter
          • Determine boiler temperature performance KPI score
          • Determine chiller temperature performance KPI score
          • Determine if boiler is operating when OAT is above boiler enable set point
          • Determine if boiler system is slow to meet setpoint on startup
          • Determine if CCV is open while OAT is lower than the threshold, and HCV or Steam Control Valve is open
          • Determine if chiller is operating when OAT is below chiller enable set point
          • Determine if chiller system is slow to meet setpoint on startup
          • Determine if chiller temperature control requires tuning
          • Determine if consumption meter has failed
          • Determine if cooling control is ineffective/unresponsive
          • Determine if cooling tower bypass valve operation is faulty
          • Determine if Cooling Tower Fan is Running when Bypass Valve is Open
          • Determine if Damper (MAD, OAD, RAD, VAV Damper) Signal is Modulating at an Abnormal Rate
          • Determine if equip. amperage is higher than historical average
          • Determine if free cooling could be used for AHU operation
          • Determine if heating control is ineffective/unresponsive
          • Determine if heating and cooling control is overlapping
          • Determine if heating is undersized
          • Determine if mixed air damper (MAD) control could be optimized during heating season
          • Determine if mixed air damper control is suspect
          • Determine if mode has not changed at least once during the course of a week
          • Determine if outdoor air fraction is suspect
          • Determine if primary system is slow to meet setpoint on startup
          • Determine if secondary equip. is changing state too frequently
          • Determine if sensor is at fault/out of calibration
          • Determine if setpoint is static
          • Determine if system occupancy is changing state too frequently
          • Determine if temperature sensor is faulty
          • Determine if there is no noticeable decrease in electrical load during unoccupied hours
          • Determine if two units that should be staged are turned ON at the same time, without sufficient delay
          • Determine if Unit Heaters are Operating when Temperature is Above Setpoint
          • Determine if unit is running for extended period of time
          • Determine if VAV damper is constantly at near maximum (100% open)
          • Determine if zone cooling is undersized
          • Determine if zone heating is undersized
          • Determine if zone system is slow to meet setpoint on startup
          • Determine severity of supply air temperature control loop error
          • Determine severity of zone temperature control loop error
          • Determine supply air flow performance KPI score
          • Determine supply air pressure performance KPI score
          • Determine supply air temperature performance KPI score
          • Determine zone temperature performance KPI score
          • Enhanced Prioritization - Determine if boiler is operating when OAT is above lockout temperature
          • Enhanced Prioritization - Determine if equipment is changing state more frequently than specified
          • Enhanced Prioritization - Equipment Runtime Analysis
          • Enhanced Prioritization - Indoor Air Quality Analysis: CO2 Concentration
          • Enhanced Prioritization - Indoor Temperature Analysis
          • Equipment is running out of schedule hours
          • Heating and Cooling Degree Days [deg C] [Advanced Formula]
          • Heating and Cooling Degree Days [deg C] [Expert Formula]
          • Heating and Cooling Degree Days [deg C or F or K] [Basic Formula]
          • Heating and Cooling Degree Days [deg C or F or K] [Intermediate Formula]
          • NIST APAR1 - Supply air temp should be greater than mixed air temp (Mode 1 - Heating)
          • NIST APAR11 - Supply air temp should be less than mixed air temp (Mode 3 - Mech. Cooling w/100% OA)
          • NIST APAR12 - Supply air temp should be less than return air temp (Mode 3 - Mech. Cooling w/100% OA)
          • NIST APAR13 - Cooling coil valve command is fully open and SAT error exists (Mode 3 - Mech. Cooling w/100% OA)
          • NIST APAR14 - Cooling coil valve command is frequently fully open (Mode 3 - Mech. Cooling w/100%OA)
          • NIST APAR15 - Outdoor air temp too low for Mechanical Cooling w/min OA (Mode 4)
          • NIST APAR16 - Supply air temp should be less than mixed air temp (Mode 4 - Mech. Cooling w/min OA)
          • NIST APAR17 - Supply air temp should be less than return air temp (Mode 4 - Mech. Cooling w/min OA)
          • NIST APAR18 - Outdoor air fraction out of acceptable range (Mode 4 - Mech. Cooling w/min OA)
          • NIST APAR19 - Cooling coil valve command is fully open and SAT error exists (Mode 4 - Mech. Cooling w/min OA)
          • NIST APAR2 - Outdoor air fraction out of acceptable range (Mode 1 - Heating)
          • NIST APAR20 - Cooling coil valve is frequently fully open (Mode 4 - Mech. Cooling w/min OA)
          • NIST APAR21 - Heating/cooling/mixed air damper control is overlapping (Mode 5 - Unknown Occupied Mode)
          • NIST APAR22 - Heating/cooling control is overlapping (Mode 5 - Unknown Occupied Mode)
          • NIST APAR23 - Heating/mixed air damper control is overlapping (Mode 5 - Unknown Occupied Mode)
          • NIST APAR24 - Cooling/mixed air damper control is overlapping (Mode 5 - Unknown Occupied Mode)
          • NIST APAR25 - Persistent supply air temperature error exists (All Occupied Modes)
          • NIST APAR26 - Sensor fault/miscalibration: mixed air temp too low (All Occupied Modes)
          • NIST APAR27 - Sensor fault/miscalibration: mixed air temp too high (All Occupied Modes)
          • NIST APAR28 - Mode of operation changing state too frequently (Mode Changes)
          • NIST APAR3 - Heating coil valve command is fully open and SAT error exists (Mode 1 - Heating)
          • NIST APAR4 - Heating coil valve command is frequently fully open (Mode 1 - Heating)
          • NIST APAR5 - Outdoor air temp too high for Cooling w/OA (Mode 2)
          • NIST APAR6 - Supply air temp should be less than return air temp (Mode 2 - Cooling w/OA)
          • NIST APAR7 - Supply and mixed air temp should be nearly the same (Mode 2 - Cooling w/OA)
          • NIST APAR8 - Outdoor air temp too low for Mech. Cooling w/100% OA (Mode 3)
          • NIST APAR9 - Outdoor air temp too high for Mechanical Cooling w/100% OA (Mode 3)
          • Temperature has been below threshold for the past 24h
          • VAV Pressure Control Performance KPI
      • List of Logic Blocks
        • Aggregate Logic Block
        • Binary Filter Expression Logic Block
        • Building Weather Station Logic Block
        • Calculated Trend Log Data Logic Block
        • Cloud Cover Data Logic Block
        • Cumulative Difference Logic Block
        • Date Part Logic Block
        • Delta Logic Block
        • Filter Expression Logic Block
        • Humidity Data Logic Block
        • Linear Regression Logic Block
        • Maximum Logic Block
        • Minimum Logic Block
        • Multiple Expression Logic Block
        • Multiple Union Logic Block
        • Normalizing Logic Block
        • Offset Logic Block
        • Precipitation Data Logic Block
        • Pressure Data Logic Block
        • Rolling Aggregate Logic Block
        • Sum Logic Block
        • Visibility Data Logic Block
        • Wind Speed Data Logic Block
        • Enhanced Prioritization - Determine if chiller is operating when OAT is below lockout temperature
        • Input Data Logic Block
      • Create a Calculated Trend Log without receiving an Insight
      • How to Adjust Deadbands
      • How to Manage Rules
      • Manage Logic Blocks
      • Use the Logic Builder Canvas
      • Rules and Logic
    • Energy
      • Energy
      • Baseline Comparison in Energy
      • Create Meters from Non-Cumulative Trend Logs
      • Manage Meters
    LEARN MORE
    • FAQ’s
    • Blog
    • Knowledge Base
    • CopperTree Support – Home
    • Knowledge Base
    • News
    • API Doc
    • News and Announcements
    SUPPORT
    • Forum
    SURREY

    5455 152nd Street – Suite 300
    Surrey, BC V3S 5A5

    BELLEVUE

    3120 139th Ave SE #500
    Bellevue, WA 98005

    CONTACT US

    Hours:
    7:30am-4:30pm (PST/PDT)
    Monday to Friday

    +1 (778) 726-0524 customersolutions@coppertreeanalytics.com
    • Twitter
    • LinkedIn
    • YouTube

    © 2023 CopperTree Analytics. All rights reserved.

    • Privacy Policy
    • Terms and Conditions
    Scroll to top